£744.00
This kit fits the eighth generation Toyota Hi-Lux from 2015 onwards.
This is a bumpstop replacement kit fitted to the rear in addition to the standard spring for load support. It is supplied with Schrader (tyre) valves for inflation although options are available for On Board Air (OBA) kits which can be inflated/deflated at the touch of a button.
This is a rear axle only load support kit. This kit is ideal for fifth wheel pickups, towing, motorhome conversions, those with worn springs and heavily laden trucks in general.
This kit is designed to fit the eighth generation from 2015 onwards, however we also provide kits for earlier generations (please see shop menu). For more information don’t hesitate to contact us.
Out of stock
This is an AirRide air suspension kit for the 2015 onward Hi-lux. The original kit fitted vehicles from 1989-2015 so had a long life.
If you are unsure of the correct fitment, please email or call. The most popular kits are held in stock and those not in stock can usually be obtained in less than 2 weeks.
| Bracket Construction:- | 5mm Electroplated Steel |
| Bag Diameter:- | 7 inch (170mm) |
| Bag Style:- | Double Convoluted |
| Kit Weight:- | 12 Kg |
| Vehicle Model Dates:- | 1989-2015 |
| Axle/Beam Dimensions:- | Round |
| Vehicle Driven Wheels:- | Rear |
| Minimum Pressure:- | 20 psi |
| Maximum Pressure:- | 105 psi |
Heavy motorhomes with fixed loads are often fitted with simple control systems, such as Schrader (tyre) valves or Schrader valves and a gauge block. These work very well for vehicles carrying a fixed load/weight.
When the load in your motorhome or van varies significantly, On-Board Air (OBA) is normally required, and can add a lot of additional function. This enables you to get the very best from your kit at all times. OBA allows the ride height to be adjusted for road, weather and load conditions, and for those experiencing grounding conditions it allows the absolute maximum lift to be achieved when needed (for instance on ferries, petrol stations and rough site entrances). The vehicle can then be returned to the most comfortable setting for driving. There is also an “element” of levelling available, although its certainly no substitute for a jacking system.
OBA is also great for towing, where loads are added or removed, or for commercial vehicles that start the working day at one weight and end it at another as deliveries are completed.
OBA packages come in various specifications as outlined below which range from the most basic to a fully automatic system. If in doubt, please contact us via e-mail or phone.
The simplest kit available. One fitting at the airbag, a length of line and a Schrader (tyre) valve at the other end. The valve can be fitted anywhere convenient to the user and can be inflated anywhere a tyre can be inflated (e.g. garage, petrol station).
Recommended for: Vehicles with a fixed load that does not alter and users who want an entry-level system. Ideal for motorhomes because they are always very heavy vehicles but the weight does not usually vary considerably. Users need to find an air source (i.e. at a garage or petrol station) to adjust the pressures (emergency tyre inflators rarely last if asked to inflate air suspension regularly), but remember suspension systems usually require up to 100 psi which may not be available everywhere.
A gauge kit with two Schrader valves and twin needle gauge (to monitor left and right). No moving parts to go wrong, such as taps or levers. Pressure can be monitored from the gauge, which can be fitted anywhere convenient (and away from the inflation valves if desired). Several versions available. This option does not come with a plate that can be fitted to the dashboard.
Recommended for: Vehicles with a fixed load as above but with two gauges for those who always want to know the pressure in the bags.
Includes a 10% duty cycle compressor, maximum 105 PSI but only a tiny 10% duty cycle and 1 USG tank. Comes with an OBA hook-up kit to match the compressor, which comes with an on/off button to get to pressure. Please note that the left and right air bags are not independent, i.e. they cannot be set to different pressures.
Recommended for: Infrequent adjustment. When the load varies, due to towing or adding payload to a commercial vehicle, air-managed solutions get the very best from the system but this system is NOT rated for commercial use. This is the same spec. as many competitors “standard duty” default kit. This is an entry-level, compressor control package and our most basic OBA kit
Includes a low duty cycle compressor, maximum 120 PSI. Please note: The left and right air bags are independent but cannot simply be set to different pressures at the touch of a button. Higher specification than the entry-level kit, making this kit very good value for money but the best value in terms of spec for your buck is the Standard Duty OBA.
This kit is simple to install and operate. As the video below shows, it has a single button to simultaneously lift both sides. To deflate the air and lower the vehicle requires use of the Schrader valves at the bottom of the controller.
Recommended for: Users who want a better controller with a heavier-duty compressor but who perhaps don’t adjust the suspension every time they use it and don’t mind waiting 30-40 seconds to lift or drop the vehicle.
Includes a low 33% duty cycle compressor (better than many OEMs), maximum 120 PSI, small 2.5 USG steel tank, twin-button-and-gauge controller and an OBA hook-up kit to match the compressor. Please note: The left and right air bags are independent and can be set to different pressures. Used for regular adjustment. Twin paddle switches (like old style electric window switches) allow almost instant adjustment through the whole range.
Recommended for: Users who regularly adjust the suspension and want to do so in a few seconds. If you have grounding issues on a motorhome then this is the controller for you. This is the minimum recommended for commercial vehicles. Ideal if you have a steep drive, problems with ferries or regularly change the weight of your vehicle.
This is considered our best value OBA system in terms of its modest price and high spec.
Includes a 100% duty cycle compressor, maximum 200 PSI, 200 PSI tank, twin paddle/gauge controller. Used for daily adjustment. Top general spec. This is a far higher spec than the Standard Duty but essentially the same principle. Single, combined button for up and for down, and a single gauge for both left and right (twin needle).
Recommended for: Ideal control for commercial use and for motorhome users who just want the confidence from fitting the best compressor and a simpler/smarter controller. If you adjust multiple times per day then this is the ideal option.
Includes a 100% duty cycle compressor, maximum 200 PSI, 200 PSI tank. Used for daily adjustment. Top spec, includes computer controller with programmable pre-sets and standard height adjustment for general running but can be overridden when conditions require.
This system is designed for adjusting four corners and, as the name suggests, is the ultimate controller. Everything is located in one integrated unit, which makes installation simple, and the remote function from any Android or Apple phone or tablet is a real bonus.
Recommended for: Users who want the best computer we offer and a remote control. Anyone who wants the best On-Board Air money can buy should go for Ultimate OBA.
Includes a 100% duty cycle compressor, maximum 200 PSI. Used for hour by hour adjustment, to maintain a pre-set ride height (set at install) . Top spec. This system is currently only available for leaf spring vehicles and perfect for load support kits. Automatic is ideal where you want a high quality system but dont want to bother having anything to do with it – no manual controller, no gauge and no tank. The height is set during the installation and cannot be changed later.
Manual override (dump button) and a tank is available at extra cost. No gauges.
If you need further clarification or your needs are not listed, please do call 0800 772 0315 or email enquiries@airide.uk and we will be very happy to help, or to raise a personal quotation.
This is a generic video clip to show the nature of the kits. Actual kit contents may vary. Many of the kits are generally similar and therefore please check out some of the other videos for an idea of what the kits look like, and you may browse videos by clicking here. If you need further information please do email or call.
Airide Limited offer a warranty on Dunlop air conversion kits for a period of 5 years from time of purchase. This warranty is limited to the original purchaser and subject to registration at the time of fitting. If you fail to register then a 1 year warranty is offered.
Dunlop kits are the very best fitting kits on the market. If the kit does not appear to fit – STOP and call us, as a vehicle misidentification may have occurred. Kits will be accepted for return and exchange only if they are undamaged. The buyer must cover the return postage.
Please note that the products listed on this site are a small proportion of those we are able to offer. If you struggle to find what you are looking for please use the search box above and if you still cannot find what you are looking for please feel free to email Enquiries@airride.uk or call 0800 772 0315
Media error: Format(s) not supported or source(s) not found
Download File: https://airride.co.uk/wp-content/uploads/2019/02/shake-ass-for-website.mp4I have fitted the Boss Air suspension and it has already made a huge difference.
I just wanted to say thank you for helping us sort out our comfort issues with the ride we get in our converted Doblo. Having the Schrader valves fitted has really made a massive difference and we can now enjoy using our vehicle and driving in style :-)
Thank you for your help and support.
Ordered parts, here in 2 days.
Had rear air suspension fitted on my Motorhome. Airide did a fantastic job, everything works and looks great. Would highly recommend using them, very professional.
Very helpful staff.... Didn't have exactly what I wanted but I now have a better solution ... very happy
Simple and effective. Thanks.
Have been very helpful trying to tell me how to fit the airbag i ordered
Really Responsive
Really Responsive
Fitted well, nice quality. And the ride is perfect.
Returning customer to a helpful, knowledgeable and efficient small company with a good product.
Absolutely brilliant customer service, I can't thank the guys enough for helping me, the airride system fitted to my 2018 focus st is unreall thank you again will definitely go to them in the future 😁😁
Fantastic Part and exactly as described
Excellent service, Product delivered as described and perfect for the job intended. Good people to deal with.
Top guys who are extremely helpful.
Really helpful, good advice given, which led to a sale for them, and now will keep them in mind for future purchases.
The ride is so much better than before. It is even better when my wife is in the car. My wife says thank you for making her ride and life more comfortable. She is ready, she says, to go on long rides now.
I have used the vehicle over the weekend & it is all working very well & were very pleased indeed with it.
The staff from AirRide are very helpful and knowledgeable. They treat customers professionally. The order was dispatched promptly and arrived quickly. Would highly recommend to anyone I know.
The Boss was very knowledgeable and instilled great confidence. He talked me through the process and covered all areas of concern, putting my mind very much at rest.
A great job expertly done!
Top notch service and advice. Thanks for all the help.
