Jaguar XJ40, X300 & X308 (1986-2003) Full Kit | AirRide

£1,250.00

Fits:-

XJ40 and the XJR XJ40 (1986-1994)

X300 and the XJR X300 (1994-1997)

X308 and the XJR X308 (1997-2003)

Very low stance

Full 4 corner kit

Basic kit bags and brackets only

Multi management packages available

 

In stock


Please check the OPTIONS tab below (when present) for further explanation of Management options


Management

Please note that other specifications are available on request. Please contact us for a personal specific quotation.

Product price
Additional options total:
Order total:

Description

This kit is designed for Jaguars from 1983 to 2003. It fits the XJ6, XJ12, and XJ8, including XJR. It specifically fits XJ40 models from 1986-1994, X300s from 1994-1997, and the X308 from 1997 to 2003. The basic kit includes bags and brackets and runs very low. Spacers can be used to lift the car if required but this kit is designed for low-rider style vehicles. The kit is a tight fit and classified as 7/10 on our guide. Although mostly bolt-on, there is a small piece of welding needed on the front and rear.

Basic instructions are available with the kit and the vehicle handles and rides well after conversion.

Options

Car kits can be supplied with or without air management, although going without isn’t advisable if you have air on all four corners of your vehicle.

Air management allows you to get the very best from your kit at all times. It allows the ride height to be adjusted for road, weather and load conditions, while also giving you a street-skimming stance when the time is right.

We have four main management options for cars at AirRide. Read on to find out more:

No compressor, no tank

You can have a car kit with no air management system, but this is not recommended. With this option you will receive the air bags, brackets and struts required for a basic air suspension system, but no compressor or tank, as without some form of control system the compressor and tank would not be able to function correctly.

Manual Paddle Control (MPC)

MPC is controlled by four buttons, one for each air bag. These buttons act like electric-window switches, meaning you can either raise or lower the amount of pressure in each air bag by pressing up and down on each switch. The switches will normally fit somewhere on your dashboard.

MPC comes with an aluminium, 100% duty cycle compressor with up to 200 PSI and an air tank, so you can adjust your ride height whenever you wish (as long as it’s safe). It also comes with twin gauges and a tank gauge.

Solenoid control kit

Solenoid kits are controlled in the same way as an MPC kit, with four electric window-style buttons. However, solenoids act much faster than manual controls.

You can get either standard or advanced solenoids from AirRide. Advanced solenoids run much faster than the standard ones and can be installed a lot easier, as the come in blocks of two, rather than one.

Our solenoid kit comes with a 100% duty cycle compressor and tank for instant adjustment, as well as twin gauges and a tank gauge.

Digital computer system

The Air Lift 3P computer system electronically controls the amount of pressure in each air bag. This can be controlled either with a wired controller or a phone app. You can also set up to five pre-set heights, meaning you can slam or raise your car with just a single touch. The computer will also automatically alter your height to allow for road conditions. This is also the easiest system to install, meaning you’ll save money on installation, as compared to the MPC kit or solenoid kits.

The computer system also comes with an aluminium 100% duty cycle compressor with up to 200 PSI and an air tank, allowing for constant adjustment.

Other options

If you would prefer an air management system other to those listed, please feel free to call or e-mail us. We are happy to discuss your personal requirements and make sure you get the management system that is right for you.

Warranty

AirRide Sales Limited offers a warranty on AirRide Custom products for a period of two years from the time of purchase. This warranty is limited to the original purchaser and subject to registration at the time of fitting. If you fail to register, a one-year warranty is offered.

If the kit does not appear to fit – stop and call us, as a vehicle misidentification may have occurred. Kits will be accepted for return and exchange only if they are undamaged. The buyer must cover the return postage fee.

Delivery

Delivery on Air Assistance kits is currently £19 for Mainland UK excluding Highlands. Please get in touch to find out an exact date for dispatch. We sell items outside the UK but website postage prices are for UK. Additional charges will be levied for non-UK and they will be invoiced separately. Alternatively international customers can email their requirements to enquiries@airride.uk and we can raise an invoice including international postage. Please do call if you need more information or to know the stock situation which changes from hour to hour. Please do not assume that because you phoned last week and found it was in stock that it is still in stock.