Welcome to AirRide.

We are proud to present our latest development - the full front hybrid kit for Sprinter/Crafter! This hefty kit will replace your existing front suspension (transverse leaf spring on this particular vehicle) and includes replacement springs, upper brackets, lower brackets, underfloor pump and cage mounts and large twin bags. The max combined capacity is incredible 3.5 tons for the front axle - well beyond any real life scenario! It rides well, lifts well, drops loads and is something we have been constantly asked for over the past few years. So we finally did it!!!

Because of some of the characteristics of the Sprinter/Crafter front this is not a strut kit but a complete conversion kit.

From camper vans to custom show vehicles to vehicles that need delicate load solutions, there are many possible applications for this kit.

AVAILABLE HERE for pre-order. Final development/testing is underway but if you are interested in this product please reach out to be updated.

£3495 + shipping.

Require more information? Get in touch by emailing to ENQUIRIES@AIRRIDE.UK or call us on 0800 772 0315.

We've been busy developing new products and so has TA Technix. If you have a Mercedes W211 (2003-2009) and want to slam it then we have a kit for you!

AVAILABLE HERE

£1399 + shipping.

If you’re looking for both comfort and drop, this is the kit for you. Designed and made by us here in Norwich, it is a heavy duty kit with large diameter high capacity front bags. This is the correct bag for the size and weight of the vehicle and specifically designed for heavy motorhomes and campers. We also offer a TA Technix kit for this vehicle but its for lighter vehicles and is expressly unsuited to motorhomes which need a heavier kit. The kit uses some of the highest rated bags in common use on the market. Although some minor cutting and drilling is required to fit this kit it is worth it for the advantages it offers.

£1875 + air management.

The product page is being updated with more product info coming soon.

We're working on new photos and videos for our On Board Air options and will be adding new products to the website.

Stay tuned!

There will be important changes to the manufacturer's warranty from 03/09/2021.

3P/3H/3S will have a 2 year warranty if purchased without AirLift Suspension.

3P, 3H and 3S will have a 4 year  warranty if purchased with a front and rear suspension kit from AirLift Performance.

Suspension kits have a 1 year warranty if bought without 3P, 3S, or 3H and a 2 year warranty if bought at the same time.

All warranties will be limited to the original buyer and proof of purchase will be required for warranty claims placed direct with AirLift. Registration of your warranty is required.

This represents a clarification and compliance with UK law (which does not recognise the previously ambiguous terms used - Limited Lifetime Warranty). This is not a radical change for this top notch product, which has excellent backup, reliability and now clearer warranty terms.

We've received quite a few calls recently regarding a load support kit for Ford Ranger PX. We have a Boss kit available on our website but we thought it's worth a blog post to make it more visible:

AVAILABLE HERE

£625 + shipping.

Looking back to last year...

As we have mentioned before, late in 2020 we were asked by Workerbee TV to help Goblin Works Garage with their new show “Mod Shop” and supplied air suspension parts for a Mini.

The episode was first broadcasted in March but now you can watch it for free HERE.

Our office will be closed between 26th July to 30th July  2021 for our annual summer shutdown.

We will be back on Monday 2nd August. Orders placed during the week will be processed upon return.

If you require technical assistance for a product you are fitting then please email us at ENQUIRIES@AIRRIDE.UK using the subject ‘Technical’. Emails will be monitored sporadically during the week although only those relating to your technical enquiries will be answered.

We thank customers for their support and business during the last year and hope you are getting to enjoy your motorhomes, vans and cars this summer now that events are opening up again.

We've recently added a new Boss load support kit to our website:

AVAILABLE HERE

£695 + shipping.

Continuing our mini-series of frequently asked questions, this blog post will be dedicated to maximum drop and lift.

In short, air suspension is not a magic solution for all problems - but it can solve many. Not every vehicle can be slammed right to the ground and not every vehicle can be made to ride like a Rolls Royce - but thats not always what customers want, and even if it is then there is usually a trade off between drop and ride quality.

AirRide specialises in aftermarket air suspension, that is, vehicles that were not originally fitted with air suspension. Our car kits are primarily designed to lower the vehicle. Our load support kits stabilise heavy vehicles. Our full rear kits are used for vehicles that need to be lowered while loading/unloading, nd to have the very best ride possible at all times.

The exact lift/drop range will depend on the kit, the vehicle and the application and customer requirements. For this reason, we wont usually quote specific minimum and maximum ranges.

One of the most popular questions we get asked is: what is the difference between full air suspension and semi air suspension?

Full air suspension actually has two meanings which is why we always ask customers for more information. Full can mean both front and rear or it can mean a rear air suspension solution where the entire metal spring is replaced by an air spring as opposed to an auxiliary air suspension which is fitted in addition to the existing suspension. This question is most relevant to Motorhomes, Vans and sometimes pickups.

Cars usually have full air in the sense that it is both front and rear and it becomes the entire suspension system. It is usually managed with a computer controller.

Semi air suspension which is also called load support, auxiliary air or sometimes supplementary or secondary suspension is installed in addition to your existing suspension and is aimed at heavy vehicles, such as commercial vans and motorhomes that are often at their weight limit.  Load support improves ride quality and lifts the vehicle up but will not lower it.

If you need to lift and lower the vehicle then a full rear kit is required. It is used by commercial vehicles, limousines, museum vehicles, aviation transport vehicles, etc. It replaces your existing spring.

Air management for semi air suspension ranges from basic Schrader valves to manual on-board air (OBA) options.

Over the years our Boss Phil has done a fair few jobs for film and TV companies including supplying parts for Fast and Furious 2, Fast 9 (still waiting for the Covid delayed release) and for vehicles used on TV programs such as EastEnders and in the old days The Bill. A decade ago, he even worked on 3 episodes of Pimp my Ride UK. Most of our work is very much off camera as mentioned or even behind the camera such as airbags for tracking vehicles (often seen in the background crew shots on Top Gear/Grand Tour,,,) and AirRide delicate load solutions for outside broadcast units for various companies in trailer and van configuration.

Late in 2020 we were pleased to be asked by Workerbee TV to help Goblin Works Garage with their new show “Mod Shop”. Having seen the finished Discovery Plus show for the first time the MINI looks amazing and we are so pleased to see that the owner of the car was so happy he was moved to tears by the finished car.

The show can be seen by streaming Discovery Plus and we are told will also be on Quest/D-Max later in the year. Big thank you to Derek for the loan of tools and bolts we forgot to take and to Jimmy, Helen and Ant for making us so welcome. It was a fun experience to see how some of our favourite shows are actually made – particularly how many times you have to do the same bolt up and from how many angles!!! ?

Due to Bad Weather in Norfolk on 8th-10th February there will be limited telephone service and no parcel dispatches. Emails will be dealt with but please expect some delays. We hope to return to normal shortly but this week is expected to be bad weather and we are located in a rural area without gritting and ploughing which has experienced 9 inches of snow and severe drifting due to high winds. Some areas are 3ft deep. Sorry for any inconvenience caused.

January has been a busy month for us with a host of revised and new kits underway. Check back for all the latest info.