AL-KO Chassis Ducato, Relay, Jumper and Boxer Kit (2006-current) by AirRide


These kits fit single, rear axle Fiat, Citroen and Peugeot vehicles equipped with AL-KO-torsion-bar rear suspension.  These kits fit only a single rear axle and are intended for load support. Please contact us if you would like a quote for a tag axle kit.

All AL-KO air suspension kits come with various options for management system, so you can vary suspension as required.  Unlike other suspension types, an onboard management system is essential to ensuring the best possible suspension on AL-KO-chassis vehicles.

Please note: After you purchase an AL-KO kit, we will need to contact you via telephone or email to confirm a few pieces of information before processing your order. This is due to the number of variations in AL-KO-chassis suspensions, and we need to ensure we identify the right kit for you.

We will require information on:

– The model
– Year
– Position of the axle in relation to the chassis (either inside the chassis or in a bracket hanging below)
– Length of protrusion of axle from chassis
– Clearance of chassis from ground (measured from the base of the chassis, not the bracket)

There may be a slight variation in price, depending on what model you have, but this is usually limited between £50 and £100. This is invoiced separately if required.

These kits fit the AL-KO-torsion-bar suspension by attaching between the chassis and the suspension arm. They are slightly more advanced to fit but still well within the capacity of a competent local garage.

If you need additional information, please don’t hesitate to call or email.

In stock

Please check the OPTIONS tab below (when present) for further explanation of Management options

Management *

Please note that other specifications are available on request. Further information in the “Options” tab below.
Please contact us at enquiries@airride.uk for a personal specific quotation if your requirements are not listed.

Product price
Additional options total:
Order total:


This is an AirRide air suspension kit. Based on several decades specialising in air suspension systems, we believe this to be the best-quality air assistance kit on the market for the AL-KO. This kit:

  • Is a practical bolt-on installation, rated as advanced DIY or local-garage fitment
  • Improves stability and handling and reduces roll
  • Recovers lost suspension motion to improve ride quality
  • Lifts sagging vehicles to reduce or prevent grounding – this is the most common complaint regarding AL-KO chassis vehicles
  • Assists with towing
  • Can help re-rating for heavier capacity on some vehicles

It includes:

  • High-quality, metal brackets, made from high-grade 6mm steel in most cases – stronger most kits on the market.
  • Properly-secured brackets that won’t slip around your suspension arm, fracture or come adrift
  • Automotive-grade air bags. Bags have at least six inches of lift potential
  • Properly-designed brackets, mounted at points able to take the load
  • A five-year extended warranty (terms apply)
  • Range of spacers available to ensure the bags are always working at their best.

If you are unsure of the correct fitment, please email or call. The most popular kits are held in stock and those not in stock can usually be manufactured in less than 2 weeks.

[NOTE:- Some AL-KO AirRide conversions need additional spacers fitted which can only be ascertained after full installation]


NB! This kit might interfere with hydraulic levelling which might need to be moved. If in doubt, please send us pictures or get in touch.


Bracket Construction:- 6mm Powder Coated Steel
Bag Diameter:- 5.5 inch diameter
Bag Style:- Tapered Sleeve
Kit Weight:- 16 Kg
Vehicle Model Dates:- 2006-current
Axle/Beam Dimensions:- Varies
Vehicle Driven Wheels:- Rear
Minimum Pressure:- 20 psi
Maximum Pressure:- 105 psi



AL-KO kits are only supplied with On-Board Air (OBA) kits; this allows you to get the very best out of your kit at all times. OBA kits allows ride characteristics to be adjusted for road, weather and load conditions and, for those experiencing grounding conditions, it allows the absolute maximum lift to be achieved when needed (for instance at ferries, petrol stations and rough site entrances).

We have five different OBA packagess, as outlined below. Budget Duty OBA is automatically included and users can then upgrade using the drop-down list. If in doubt, please contact us via email or phone.

Budget Duty OBA (included)

Includes a 10% duty cycle compressor, maximum 105 PSI. Comes with an OBA hook-up kit to match the compressor, which comes with an on/off button to get to pressure. Also comes with a cross-locking mini valve. Please note that although the left and right air bags are independent, they cannot be set to different pressures. Does not include a tank.

Recommended for: Infrequent adjustment. When the load varies, due to towing or adding payload to a commercial vehicle, air-managed solutions get the very best from the system. This is an entry-level, compressor control package.

Economy Duty OBA

Includes a low duty cycle compressor, maximum 120 PSI. Please note: The left and right air bags are independent but cannot simply be set to different pressures at the touch of a button. Higher specification than the entry-level kit, making this kit very good value for money.

This kit is simple to install and operate. As the video below shows, it has a single button to simultaneously lift both sides. To deflate the air and lower the vehicle requires use of the Schrader valves at the bottom of the controller.

Recommended for: Users who want a better controller with a heavier-duty compressor but who perhaps don’t adjust the suspension every time they use it and don’t mind waiting 30-40 seconds to lift or drop the vehicle.

Standard Duty OBA

Includes a low duty cycle compressor, maximum 120 PSI, small steel tank, twin button-and-gauge controller and an OBA hook-up kit to match the compressor. Please note: The left and right air bags are independent and can be set to different pressures. Used for regular adjustment. The compressor is pre-wired with only the connections to the switching relay and three to the vehicle to be made. Four buttons allow users to lift or drop the vehicle from the control panel in a few seconds.

Recommended for: Users who regularly adjust the suspension and want to do so in a few seconds. If you have grounding issues on a motorhome then this is the controller for you. This is the minimum recommended for commercial vehicles. Ideal if you have a steep drive, problems with ferries or regularly change the weight of your vehicle.

Premium Duty OBA

Includes a 100% duty cycle compressor, maximum 200 PSI, 200 PSI tank, twin paddle/gauge controller. Used for daily adjustment. Top general spec. This is a far higher spec than the Standard Duty but essentially the same principle. Single, combined button for up and for down, and a single gauge for both left and right (twin needle).

Recommended for: Ideal control for commercial use and for motorhome users who just want the confidence from fitting the best compressor and a simpler/smarter controller. If you adjust multiple times per day then this is the ideal option.

Ultimate OBA

Includes a 100% duty cycle compressor, maximum 200 PSI, 200 PSI tank. Used for daily adjustment. Top spec, includes computer controller with programmable pre-sets and standard height adjustment for general running but can be overridden when conditions require.

This system can adjust up to four corners and, as the name suggests, is the ultimate controller. Everything is located in one integrated unit, which makes installation simple, and the remote function from any Android or Apple phone or tablet is a real bonus.

Recommended for: Users who want the best computer we offer and a remote control. Anyone who wants the best On-Board Air money can buy should go for Ultimate OBA.

If you need further clarification, or your needs are not listed then, please do call 0800 772 0315 or email enquiries@airide.uk and we will be very happy to help, or to raise a personal quotation.


Airide Limited offers a warranty on AirRide Gold products for a period of one year from the time of purchase. This warranty is limited to the original purchaser.

If the kit does not appear to fit – STOP and call us, as a vehicle misidentification may have occurred. Kits will be accepted for return and exchange only if they are undamaged. The buyer must cover the return postage.

You may also like…