Description
-
- Collapsed height: 2″ / 50.8 mm
- Extended height: 8.5″ / 215.9 mm
- Max diameter: 5.875″ / 149.2 mm
- Top port size varies but we usually stock 3/8″ NPT
- Optimum ride height: 3.5″ – 5.25″ / 88.9 – 133.4 mm
- Industry standard bolt pattern
- Machined 6061 aluminium caps
Can be used for front or rear suspension conversion on both straight or angled installations. Offers more travel than most bags in the same diameter class. Single bellow construction greatly increases the stability of the air spring allowing for increased angle and load applications without the banana center kick out. Maximum outside diameter when compressed is 5.875″ and will shrink down to about 5.5″ when inflated thus minimizing frame cutting in most applications.
Specifications
| Compressed Height |
50mm |
| Fully Extended Height |
215mm |
| Diameter |
150mm |
| Designed Operating Height |
160mm |
| Maximum Lift Capacity per bag at 110 PSI |
1300kg |
If you require any further information that is not listed above call us on 0800 772 0315 or send us an email to enquiries@airride.uk
Warranty
Airide Limited offer a warranty on Universal Air products for a period of one year from the time of purchase. This warranty is limited to the original purchaser.
If the kit does not appear to fit – STOP and call us, as a vehicle misidentification may have occurred. Kits will be accepted for return and exchange only if they are undamaged. The buyer must cover the return postage.
Delivery
Postage cost varies for Universal Air products. If multiple items are ordered you will only be charged postage costs for the heaviest item. Delivery will be calculated at check out.
