Mercedes Sprinter W910 200 & 300 FWD (2018-) | Dunlop

£525.00 inc. VAT

NOTE:- This product is currently unavailable. Please check out the toughest kit on the market for the Mercedes Sprinter from Boss HERE

This kit fits any Mercedes Sprinter W910 200 & 300 FWD (2018 onwards).

Please bear in mind, this kit is for the front-wheel-drive variation only. For the rear-wheel-drive Sprinter (2018-), click here, and for the twin-rear-wheel Sprinter (2018-), click here.

Please confirm whether your vehicle is FWD, RWD or twin-rear-wheel at time of order. If your Sprinter is a 2018 model, please also send us a picture of the vehicle to enquiries@airride.uk so we can determine the correct kit.

This is a bump-stop replacement kit fitted to the rear axle in addition to the standard spring for load support. It is supplied with Schrader (tyre) valves for inflation, although options are available for on-board air kits which can be inflated/deflated at the touch of a button. See the ‘Options’ tab below for more information.

This is a rear-axle-only load-support kit.

We can also fit this kit for you if you like. Just call or e-mail us to book your Sprinter into the workshop.

In stock

Please check the OPTIONS tab below (when present) for further explanation of Management options

Management *

Please note that other specifications are available on request. Please contact us for a personal specific quotation.

Product price
Additional options total:
Order total:


NOTE:- This product is currently unavailable. Please check out the toughest kit on the market for the Mercedes Sprinter from Boss HERE

This is a Dunlop air suspension kit that:

  • is a practical bolt-on installation which is rated as DIY or local garage fit
  • Improves stability and handling and reduces roll
  • Recovers lost suspension motion to improve ride quality
  • Lifts sagging vehicles to reduce or prevent grounding
  • Is superb for help with towing
  • Can help pass an MOT if your vehicle is low
  • Can help re-rating for heavier capacity on some vehicles

It includes:

  • Electroplated quality metal brackets made from high grade 5mm steel in most cases
  • Properly-secured brackets that won’t slip, fracture or come adrift.
  • Proper automotive-grade air springs (air bags). Bags have at least six inches of lift potential
  • Specifically-designed brackets, mounted at points able to take the load
  • A five-year extended warranty (terms apply)
  • Full EU certification for legal use in EU and other countries subject to equivalency

If you are unsure of the correct fitment, please EMAIL or CALL.


Bracket Construction:- 5mm Electroplated Steel
Bag Diameter:- 7 inch (170mm)
Bag Style:- Double Convoluted
Kit Weight:- 13 Kg
Vehicle Model Dates:- 2006 – current
Axle/Beam Dimensions:- Round
Vehicle Driven Wheels:- Rear
Minimum Pressure:- 20 psi
Maximum Pressure:- 105 psi


This is a generic video clip to show the nature of the kits. Actual kit contents may vary. Many of the kits are generally similar and therefore please check out some of the other videos for an idea of what the kits look like, and you may browse videos by clicking here. If you need further information please do email or call.


Delivery for full air suspension kits are free to mainland UK. Delivery to the Highlands, islands and overseas will be charged however, so please call us for a quote.

Please get in touch to find out an exact date for dispatch. We sell items outside the UK but website postage prices are for the UK. Additional charges will be levied for non-UK and they will be invoiced separately. Alternatively, international customers can email their requirements to ENQUIRIES@AIRRIDE.UK and we can raise an invoice including international postage.

Please do call if you need more information, or to check on stock as it can change quickly. Please do not assume that something is still in stock if you last checked on a different day to ordering.


AirRide Sales Limited offer a warranty on Dunlop air conversion kits for a period of 5 years from time of purchase. This warranty is limited to the original purchaser and subject to registration at the time of fitting. If you fail to register then a 1 year warranty is offered.

Dunlop kits are the very best fitting kits on the market. If the kit does not appear to fit – STOP and call us, as a vehicle misidentification may have occurred. Kits will be accepted for return and exchange only if they are undamaged. The buyer must cover the return postage.


Car kits can be supplied with or without air management, although going without isn’t advisable if you have air on all four corners of your vehicle.

Air management allows you to get the very best from your kit at all times. It allows the ride height to be adjusted for road, weather and load conditions, while also giving you a street-skimming stance when the time is right.

We have four main management options for cars at AirRide. Read on to find out more:

No compressor, no tank

You can have a car kit with no air management system, but this is not recommended. With this option you will receive the air bags, brackets and struts required for a basic air suspension system, but no compressor or tank, as without some form of control system the compressor and tank would not be able to function correctly.

Manual Paddle Control (MPC)

MPC is controlled by four buttons, one for each air bag. These buttons act like electric-window switches, meaning you can either raise or lower the amount of pressure in each air bag by pressing up and down on each switch. The switches will normally fit somewhere on your dashboard.

MPC comes with an aluminium, 100% duty cycle compressor with up to 200 PSI and an air tank, so you can adjust your ride height whenever you wish (as long as it’s safe). It also comes with twin gauges and a tank gauge.

Solenoid control kit

Solenoid kits are controlled in the same way as an MPC kit, with four electric window-style buttons. However, solenoids act much faster than manual controls.

You can get either standard or advanced solenoids from AirRide. Advanced solenoids run much faster than the standard ones and can be installed a lot easier, as the come in blocks of two, rather than one.

Our solenoid kit comes with a 100% duty cycle compressor and tank for instant adjustment, as well as twin gauges and a tank gauge.

Digital computer system

The Air Lift 3P computer system electronically controls the amount of pressure in each air bag. This can be controlled either with a wired controller or a phone app. You can also set up to five pre-set heights, meaning you can slam or raise your car with just a single touch. The computer will also automatically alter your height to allow for road conditions. This is also the easiest system to install, meaning you’ll save money on installation, as compared to the MPC kit or solenoid kits.

The computer system also comes with an aluminium 100% duty cycle compressor with up to 200 PSI and an air tank, allowing for constant adjustment.

Other options

If you would prefer an air management system other to those listed, please feel free to call or e-mail us. We are happy to discuss your personal requirements and make sure you get the management system that is right for you.

You may also like…