fbpx

Mercedes Vito/Viano/V Class (2003-current) | REAR with Boss Bags

£735.00

This kit fits the REAR of a Mercedes Vito (also known as the Viano, V Class, and several other names) from 2003 onwards in rear wheel driver variant.
This kit is a full air suspension kit fitted as a direct replacement for coil spring or OEM air springs. The kit bolts directly onto the vehicle, with only a small modification required to the spring mounting lug and two holes to drill on later vehicles (Mercedes stopped putting them in around 2014) . It is supplied with Schrader (tyre) valves for inflation although options are available for On Board Air (OBA) kits which can be inflated/deflated at the touch of a button.

In stock


Please check the OPTIONS tab below (when present) for further explanation of Management options


Management (single axle) *

Please note that other specifications are available on request. Please contact us for a personal specific quotation.

Description

This kit is for the REAR of a Mercedes W447 and W639 and is manufactured for AirRide.

This full air suspension kit (replaces your coil spring entirely) and comes with:

  • 2 x BOSS Extreme Series 2600 Double Bellow Airbags
  • 4 x brackets (2 upper & 2 lower)
  • Mounting Hardware
  • Dual Schrader Valves
  • Instructions for fitting

Boss Extreme series airbags are rated at 1186 kg per side and have been Australian government approved & tested to over 750 psi.

All Boss airbags are manufactured by Boss and are branded Boss. Beware of unbranded airbags, usually coming from China from other companies.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

This kit features:-

  • Excellent and practical bolt-on installation which is rated as DIY or Local Garage Fit.
  • Improves stability and reduces roll and improves handling.
  • Recovers lost suspension motion to improve ride quality.
  • Lifts sagging vehicles to reduce or prevent grounding.
  • Superb for towing.
  • Can prevent broken springs.
  • Can help pass an MOT if your vehicle is low.
  • Can help re-rating for heavier capacity on some vehicles.
  • Powder Coated quality metal brackets made from high grade 5mm steel in most cases.
  • Properly secured brackets that won’t slip around your axle, fracture bend or come adrift.
  • Proper automotive grade air springs (airbags) not factory grade or counterfeit as seen on many kits. Bags have at least 6 inches of lift potential. Bags rated at 1000 Kg per bag – 2 tons of extra lift/support.
  • Properly designed brackets mounted at points able to take the load – generally as bump stop replacements and won’t damage your chassis as cheaper kits can.
  • Because we believe in the products we sell, AirRide offers a 5 year extended warranty on this product. (terms apply)

If you are unsure of the correct fitment, please email or call. The most popular kits are usually held in stock and those not in stock can usually be obtained in less than 2 weeks.

You may also like…