VW Crafter/MAN TGE (2017-) Twin Rear Wheel Rear-End Kit | Dunlop


NOTE:- This product is no longer available. Please contact us by email at enquiries@airride.uk or call us on 0800 772 0315 for assistance.

A rear-end air suspension kit that fits the twin-rear-wheel model for both the VW Crafter and the MAN TGE. It will fit all models from 2017 to the present day.

This kit is fitted to the rear of the van in addition to the original spring. It can be supplied with Schrader (tyre) valves for inflation, or with on-board air to inflate/deflate at just the touch of a button.

The kit is also a bolt-on fit, meaning it is extremely easy to install, and comes with a five-year warranty.

See the ‘Description’ tab below for more information, and the ‘Options’ tab to learn more about air management.

Click here for our FWD kit for the Crafter and TGE, and here for the RWD kit.

Please check the OPTIONS tab below (when present) for further explanation of Management options

Management *

Please note that other specifications are available on request. Please contact us for a personal specific quotation.

Product price
Additional options total:
Order total:


NOTE:- This product is no longer available. Please contact us by email at enquiries@airride.uk or call us on 0800 772 0315 for assistance.

This is a Dunlop air suspension kit.

This ground-breaking kit will now give both vans a smoother, more stable and better-supported ride by raising the rear of the vehicle and removing its natural sag once and for all.

It is the perfect, easiest solution to a problem that could once only be solved with complicated and expensive custom kits.

The kit:

✅ Is a practical bolt-on installation which is rated as DIY or local garage fit

✅ Improves stability and handling and reduces roll

✅ Recovers lost suspension motion to improve ride quality

✅ Lifts sagging vehicles to reduce or prevent grounding

✅ Is superb for help with towing

✅ Can help pass an MOT if your vehicle is riding too low

✅ Can help re-rating for heavier capacity on some vehicles

As mentioned above, it also comes with a five-year warranty (terms apply), as well as full EU certification for legal use in the EU and other countries subject to equivalency.

Please feel free to call us or e-mail us for more information.


Load-support kits can be supplied with or without air management (otherwise known as air management or On-Board Air (OBA)).

Air management allows you to get the very best from your kit at all times. It allows the ride height to be adjusted for road, weather and load conditions, and for those who experience grounding issues it allows the absolute maximum lift to be achieved when needed (i.e. for ferries, petrol stations and rough site entrances). If in doubt, please contact us via email or phone.

No compressor, no tank

You can have a load-support kit with no air management system. With this option you will receive the air bags, brackets and struts required for a basic air suspension system, but no compressor or tank, as without some form of management system the compressor and tank would not be able to function correctly.

Manual Paddle Control (MPC)

MPC comes with an aluminium, 100% duty cycle compressor with up to 200 PSI and an air tank. It is controlled with four buttons, one for each air bag. The buttons act like electric window switches, meaning you can either raise or lower the amount of pressure in each air bag by pressing up and down on each switch.

Digital computer system

The computer system comes with an aluminium, 100% duty cycle compressor with up to 200 PSI and an air tank. It electronically controls the amount of pressure in each air bag. This can be controlled either with a wired controller or a phone app.  With the computer, you can adjust your car to certain pre-set heights and alter the vehicle’s height while on the move. It can also automatically adjust the height of your vehicle according to road conditions. This is the easiest system to install; it is the most highly-recommended option.

Other options

If you would prefer an air management system other to those listed, please feel free to call or e-mail us. We are happy to discuss your personal requirements and make sure you get the air management system that is right for you.


This is a bolt-on kit. This means that your local garage should be able to fit the kit without much difficulty. Alternatively, give us a call or send us an e-mail and we can arrange the installation on your behalf. We are also happy to talk you or your garage through the installation process.


AirRide Sales Limited offers a warranty on this product for a period of five years from time of purchase. This warranty is limited to the original purchaser and subject to registration at the time of fitting. If you fail to register then a one-year warranty is offered.

If the kit does not appear to fit – STOP and call us, as a vehicle misidentification may have occurred. Kits will be accepted for return and exchange only if they are undamaged. The buyer must cover the return postage.


Delivery for this kit is free to mainland UK. Delivery to the Highlands, islands and overseas will be charged however, so please call us for a quote.

Please get in touch to find out an exact date for dispatch. We sell items outside the UK but website postage prices are for the UK. Additional charges will be levied for non-UK customers, and they will be invoiced separately. International customers can email their requirements to ENQUIRIES@AIRRIDE.UK and we can raise an invoice including international postage.

Please do call if you need more information, or to check on stock as it can change quickly. Please do not assume that something is still in stock if you last checked on a different day to ordering.