fbpx

Volkswagen Amarok (2009-2022) Rear Kit | Boss Air

£695.00

This kit fits the leaf spring Volkswagen Amarok.

This kit is a bumpstop replacement fitted to the rear in addition to the standard spring for load support. It is supplied with Schrader (tyre) valves for inflation although options are available for On Board Air (OBA) kits which can be inflated/deflated at the touch of a button.

This is a rear axle only load support kit.

In stock


Please check the OPTIONS tab below (when present) for further explanation of Management options


Management (single axle) *

Please note that other specifications are available on request. Please contact us for a personal specific quotation.

Description

The Load Assist Kit comes with:

  • 2 x BOSS Extreme Series 2500 Double Bellow Airbags
  • 4 x brackets (2 upper & 2 lower)
  • Mounting Hardware
  • Quality SAE J844 Australian Government Approved Airline
  • Dual Schrader Valves Mounted in Stainless Panel
  • Instructions for fitting

Boss Extreme series airbags are rated at  1136 kg per side and have been Australian Government approved tested to over 750 psi.

All Boss airbags are manufactured by Boss Air Suspension and are branded Boss. Beware of unbranded airbags, usually coming from China from other companies.

Average dual cab pickup will require inflation to around 15-45 psi depending on load.

Boss has sold over 13000 load assist kits in Australia, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes, limited only to your imagination.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

 

This is a load support kit fitted in addition to the original leaf spring. It features:-

  • Excellent and practical bolt-on installation which is rated as DIY or Local Garage Fit.
  • Improves stability and reduces roll and improves handling.
  • Recovers lost suspension motion to improve ride quality.
  • Lifts sagging vehicles to reduce or prevent grounding.
  • Superb for towing.
  • Can prevent broken springs.
  • Can help pass an MOT if your vehicle is low.
  • Can help re-rating for heavier capacity on some vehicles.
  • Powder Coated quality metal brackets made from high grade 5mm steel in most cases.
  • Properly secured brackets that won’t slip around your axle, fracture or come adrift.
  • Proper automotive grade air springs (airbags) not factory grade or counterfeit as seen on many kits. Bags have at least 6 inches of lift potential. Bags rated at 1000 Kg per bag – 2 tons of extra lift/support.
  • Properly designed brackets mounted at points able to take the load – generally as bump stop replacements and wont damage your chassis as cheaper kits can.

If you are unsure of the correct fitment, please email or call. The most popular kits are usually held in stock and those not in stock can usually be obtained in less than 2 weeks.

You may also like…