Welcome to AirRide.

AirRide has for the past 6 years had air suspension kits available for the Volkswagen T5 Transporter. This popular van does however require a number of different air suspension solutions. some clients want lowrider custom vans (we have kits for that). Others want load support for commercial vans carrying cargo (we have kits for that), some want wheel chair access vehicles requiring low vehicles with a soft ride (we have kits for that), and others still require heavy duty support and stability control for heavy duty high motorhomes ( we have kits for that too). The latest twin bag rear end kit (4 total) is perfect for large T5 based motorhomes.

We don’d make just one kit for the T5 – there are so many differing requirements that a single kit would not satisfy everyone’s requirements. We actually have 4 different rear end solutions and two front end solutions, for a possible combination of 8 different bag/bracket kits. There are also a huge range of controller options, tank options and compressor options. Clients really are able to have exactly the kit they want and need for their T5. We also offer T4 kits in many options.

We supply our kits worldwide and in any combination you need to meet your requirements. Please call or email for more info.

The Designers at AirRide have been very busy this summer with a whole host of new kits having been developed including not one but two for the Nissan NV200 van.
The Nissan has been approved for Taxi service in New York and London so expect to see many of these vehicles on the road soon.

Two kits are available. A basic load support kit ideal for motorhome conversions with massively increased weight (left) and a Limo kit with smoother ride and the ability to lift for additional loads, or towing (above). The load support kit works in addition to the rear leaf springs and the Limo kit replaces the suspension with airbags. More details on the relevant page in the Van and motorhome section or by clicking here.

We supply kits for all manner of vehicles from Motor homes, to cars, vans and motorcycles. We supply parts and kits all over the world and people often ask us how difficult it is to fit? There are different kits for different application and the work involved to fit them varies dramatically.

Motor Home and van kits tend to be load support “assistance” kits. Usually no suspension is removed and the kit works in addition to the existing suspension. These kits are usually less than half a day and pretty straight forward to fit. The brackets tend to bolt in place of the bump stop, everything is usually spanners and sockets and usually no holes to drill (T5 is different). This is very simple and well within the ability of the average diy mechanic (provided you are safe about working under the vehicle).

Car kits intended to run as low rider type vehicles are a little more complex. Here the suspension replaces the front front and rear for a low stance. If you are able to remove, rebuild and refit a front strut safely and the same with the rear springs and dampers (shocks) then you can probably deal with the mechanical side of things. If you can fit and wire an amp you can probably deal with the electrical wiring and plumbing for the install. It takes a little time but in general none of the tasks are terribly difficult so long as you don’t rush.

We often get asked about the speed of operation of the full kits we supply for cars and small vans. The speed does depend upon the weight of the vehicle and also the pressure of the compressor and tank. The following is a rough indication.

We have 3 speeds of operation – FAST (1-2 seconds) MEDIUM (3-5 seconds) and SLOW (15 seconds or so). All times rough and all times are full four corner full lift (from fully down to fully up), although this is not something you often do in practice very often.

Fast and Medium kits use solenoids (1/2 inch with 1/2 inch hose for fast and 3/8 with 3/8 hose for medium). All our kits comes with a 200psi compressor and 200 psi aluminium tank as standard. This gives 33% extra energy over traditional and rust prone steel tanks offered elsewhere which are usually only rated at 150psi. Medium and Fast kits are not rated as safe to adjust whilst driving – you should stop to adjust. Slow kits do not use solenoids but are rated as safe to adjust whilst driving. It is acceptable and possible to fit tandem controllers (fast for shows/cruises/playtime and slow for everyday driving).

We can supply kits for any vehicle. If you do not see you car listed then please email and ask.

Here is a video showing rear air suspension on a VW T4 Motor-home.

Video showing Air Suspension on a Mercedes Vito (W639)

New Lexus kits have been added to the shop as well as a VW Lupo kit.

Check out the links below or use the page navigation.

LEXUS     LUPO

Here we have a short video showing some of the new Air Lift kits we have added and vehicles that have been lowered.

We have now added some kits to the shop for the MK1 Caddy Pickup.

There are various options available and if you don’t see what you want please get in contact with us.

Should be some better pictures and video by the end of the month!

Here at AirRide we specialize in bringing you great air suspension products at competitive prices, and we are pleased to announce that we are now distributing all AirLift products along side our own AirRide kits.

AirLift is an American company that has been dominating the marketplace since the early 1940’s.

We currently have a limited special offer on the digital AirLift kits, Many qualify for free fitting. (That’s a saving of £750!!!) Please see our terms and conditions page here and contact us for availability.

Most AirLift kits are bolt on, and all come with a 1 year manufacturers guarantee.

Have a look at the huge selection of kits we offer, and if you don’t see what you are looking for please get in contact. We will be happy to help.

Clients can now subscribe to our mailing list from the bottom of the page. We wont be bombarding you with emails, but just keeping you up to date about once or twice a month with the most important items of news. The mailing list is fully compliant with all spam laws and you can unsubscribe at any time if you change your mind. Join now and be kept up to date, and you might also LIKE or SHARE the Facebook page also available at the bottom.

We are now taking orders for our new V2 classic mini kits. There is about a 30 day waiting list as they are proving very popular.

A short video teaser of the new Mini kits we have redeveloped.

More details and pictures coming soon…

We would like to wish all current and all potential future clients a very Happy Easter. Please note that our sales office will now be closed until after the holidays but you are welcome to email or leave a message on the answerphone and we will deal with the matter on our return.
Orders placed online will be dispatched in the normal way subject to post office and carrier opening times.