These solenoid control valves are machined from billet aluminium into a compact manifold for easy fitting and easy plumbing. They have 3/8 ports for airflow and 3/8 orifice for medium speed (5 second full four corner lift on most cars).
Ports for:
- Inlet (from Tank – 3/8)
- Outlet (to inflate Bag – 3/8)
- Vent (to deflate Bag – 3/8)
- Gauge (1/4)
- Spare for sensor or block (1/4)
Solenoid manifold
These manifolds are for one corner of the vehicle. For an entire vehicle, four would be needed. The manifold has two solenoids built into it, one for inflating and one for deflating.
Solenoid manifold with fittings
This is the same manifold as above (for one corner of the vehicle), but with fittings for push-in pipe included. Please specify, when ordering, whether you would like the fittings to be: 1/4, 3/8 or 1/2 hose.
Solenoid manifold set
This is a set of four manifolds for an entire vehicle (one for each corner of the vehicle). Each manifold has two solenoids built in, one to inflate and one to deflate.
Solenoid manifold set with fittings
This is the set of four manifolds (for the entire vehicle), one for each corner, but with fittings for push-in pipe included. When ordering, please specify the fittings: 1/4, 3/8 or 1/2 hose.
5/64″ Solenoid
Air Spring Solenoid Valve; 5/64 in. Electric Valve; 1/8 in. FNPT Threads;
Our 5/64 valve is the most economical way to get the performance of an electric valve. Great for easy height adjustment and ride control. Threads are 1/8″ FNPT
3/8″ Chrome 300 PSI Solenoid with Bracket
Air Spring Solenoid; 3/8 in.; Chrome; 300 PSI w/Bracket;
All valves “work”, a good valve can handle high psi.. only a great valve can do this while looking top notch! Our new Chrome 300 psi 3/8″ valves give you speed you need and will never look horrible in a trunk like the brass valves out there.
Specs:
Port Size: 3/8″ FNPT
Finish: Chrome Plated
Orifice Size: 3/8″
CV Rating: 2.8
Max Pressure: 300 PSI
3/8″ Chrome 300 PSI Solenoid w/out Bracket |
1/2″ Chrome 300 PSI Solenoid with Bracket
Air Spring Solenoid; 1/2 in.; Chrome; 300 PSI w/Bracket;
All valves “work”, a good valve can handle high psi.. only a great valve can do this while looking top notch! Our new Chrome 300 psi 1/2″ valves give you speed you need and will never look horrible in trunk a like the brass valves out there. If speed is you biggest concern….watch our Ranger using this exact valve hit 66″ in our video section.Specs:
Port Size: 1/2″ FNPT
Finish: Chrome Plated
Orifice Size: 1/2″
CV Rating: 5.5
Max Pressure: 300 PSI