We pride ourselves on supplying the very best kits available with components chosen for reliability and safety based upon 20 years designing, installing and supplying air suspension systems. No other company has our combination of experience, variety of air suspension markets dealt with, or product range. We never compromise on safety to get the headline costs down, and even our basic kits far exceed minimal functional requirements.

AirRide custom provides the best ride and versatility within the install process. AirRide gold is performance oriented and direct bolt on, as are AirLift kits.

Do you need a replacement bag but cannot see the numbers needed to find the correct one?

This is very common and with between 10,000 and 20,000 different airbags listed in the most common catalogues (with no universal search facility) you may well be having problems finding a replacement. This is something about which customers call daily. Cars and vans usually have a range of travel of between 4 and 7 inches. Most within a range of 5-6 inches. We therefore carry a stock of bags for the kits we make with ranges between 4 and 9 inches, and with diameters between 3 inches and 9 inches. From the bags we carry, and the ones we have made for us we can usually accommodate most customers replacement needs, however this can require a re-drill on the mounting holes sometimes.

For safety bags should always be replaced in pairs. If you have a motorhome then new kits are often a abetter alternative than replacing bags because new complete kits are often not much more than a set of bags, line sna fittings, and because many new kits come with a 5 year warranty (Dunlop Systems and components kits).

All car kits are fully circuit independant - 4 circuit, FBSS. We do not offer 2 circuit systems (airbags on same axle joined) for cars as they are neither safe nor legal for road use. For motorhomes each wheel should likewise be on a separate pneumatic circuit.

6 inch diameter, 6.5 inch range, 2.5 inches compressed, works to 110psi and lifts up to 1000Kg ideally in use and 1350Kg (per bag). Lovely slim bag that does not expand when it is deflated like the double convoluted ones do. Ideal for confined spaces. Fabulous ride and handling on most vehicles. This is our bag of choice on cars - despite looking smaller than conventional double convoluted bags it has almost as much lift.

6 inch diameter, 7.3 inch range, 3.3 inches compressed, working pressure 110psi, 1300Kg lift capacity. This bag needs an inch all round clearance and must not roll onto metalwork or premature failure will result. Ideal for cars Lifts the same load as the 7 inch version but needs more pressure which results in a very slightly sportier ride on heavy vehicles (motor-homes and vans that weight 3-4 times what a car does).

Able to fabricate your own brackets? You just want the bags, lines and valves? Then this kit is for you. It includes two 6 inch Quantum bags ideal for loads up to 2 tons (pair), plus quarter inch lines, airbag fittings and a pair of Schrader valves for inflation. This kit is available with the 6 inch bags or with 7 inch ones at the same cost, or with 6 inch single convoluted bags. Please add a note at checkout regarding choice of bag.

7 inch diameter, 5 inch range, 2.5 inches compressed, works to 110psi and lifts up to 1150Kg ideally in use and 1750Kg max (per bag). Lovely slim bag that does not expand when it is deflated like the double convoluted ones do. Ideal for confined spaces. Fabulous ride and handling on most vehicles. Note this bag has one of the lowest ranges of operation so accurate bracket design with no lost motion essential.

7 inch diameter, 9 inch range, 3.3 inches compressed, working pressure 110psi, 1300Kg lift capacity. This bag needs an inch all round clearance and must not roll onto metalwork or premature failure will result. Very durable heavy lifting bag. This is an ideal bag for much heavier loads such as motorhomes and even trailers BUT it does not tolerate off-axis operation - the top and bottom must be kept parallel in operation.

This bag is old technology. Ideal to replace broken or worn bags or for some inventive clients to build their own struts. This bag is single skinned without end-caps. It seals by being bolted down using 6 screws to a metal plate. It needs a minimum thickness of 6-8mm although 10-12mm is better if you are welding the plate to avoid distortion causing leaks. It goes without saying that you must not weld with the bag in place!! Lift just under 4 inches. Diameter 6 inches but expands as compresses. Replacement on existing installs.

These Quantum Sport Double Convoluted bags are incredibly easy to fit to most struts under 54mm in diameter at the pressure tube. For larger struts please call. This is the heavy duty version of the single convoluted Quantum sport bag. Fabulous ride quality, incredible handling and easy to fit! So good you would not know it was on air. Great on cars up to about 1500Kg. Beyond this the ride quality reduces.

This airbag is large and well suited to front strut assemblies on large vehicles. This has a 3 inch clear center. The diameter is approx 7.5 inches at rest, and the height at rest is 7 inches. Compressed it is about 2 inches and inflated around 10 inches. Limited stocks only.

3 inch diameter relaxed but 5 inches needed when inflated. Ideal for minor support applications where space is limited. Tolerant of off axis applications although as with all applications should be parallel at ride height. Linear spring rate as with all reversible sleeve bags so less critical to get the ride height in the sweet spot.

Softer Bag ideal for lower wight applications. Tolerant of modest off axis operation. Top cap is 120mm diameter, lower fixing  cap is 90mm and fully extended height 300mm although ideal operation is around 200mm-250mm height. Lower bracket must have top hat design to avoid chaffing.

This is a triple convoluted 7 inch airbag complete with end plates. It has a 1/8 female threaded hole for a fitting in the top. We can supply fittings for this at extra cost.

3 inch diameter relaxed but 5 inches needed when inflated. Ideal for minor support applications where space is limited. Tolerant of off axis applications although as with all applications should be parallel at ride height. Linear spring rate as with all reversible sleeve bags so less critical to get the ride height in the sweet spot.